Description
Depending on the model chosen, they can make packs in film only, cardboard pad + film, cardboard tray, cardboard tray + film. AFW ERGON series packers achieve an output rate up to 40 packs per minute, according to the machine model and the type of product to be handled. The pack collations can vary according to the containers’ shape, capacity and size; the most requested collations are: 2×2, 3×2, 4×3 and 6×4.
| AFW 30 F ERGON | AFW 30 P ERGON | AFW 30 T ERGON | |
|---|---|---|---|
| Speed (PPM) | 30 | 30 | 30 |
| Packaging Type | Film Only | Pad + Film | Tray + film Tray only |
| Lanes | 1 | 1 | 1 |
- Machine bearing frame made of sand-blasted and powder-painted steel
- The machine is equipped with sliding protection doors in anodised aluminium featuring a rounded shape which let all the motors (featuring low energy consumption) be placed externally if compared to the mechanical groups they activate. The closing system of doors is equipped with a slow-down device, which accompanies the door smoothly in its final phase of closure
- Absence of gearboxes and prevailing employment of ICOS brushless motors equipped with digital servo-driver integrated into the motor
- For life lubricated pads
- Alternate motion cardboard blank picker, equipped with suckers
- Before the pack enters the shrinking tunnel, the film is cut by a knife equipped with motorised blade and then wrapped around the group of containers and overlapped on the bottom of the pack. The adjustment of the film length is electronic
- Compact knife group with film cutting blade driven by a direct drive brushless motorisation
- The shrink tunnel features state-of-the-art technical solutions reducing energy consumption and ensuring an eco-friendly working process. The tunnel conveyor belt is made up of fibreglass bars, driven by side chains (®SMI). Thanks to the precise analysis of thermodynamic phenomena generated by the shrink process, the tunnel distributes hot air flows in an efficient and homogeneous way on the pack, thus ensuring its excellent quality at the end of the process. Shrink resistances are positioned on the side walls of the tunnel
- Heat-shrinking tunnel with forced air ventilation
- POSYC® control panel mounted man-high and running the whole length of the machine (fixed on AFW/LSK/LWP models)
Reviews
There are no reviews yet.