FT System

BOTTOM and WALLS Inspection – EMPTY CANS( IO700-VA)

Manufacturer: FT Systeem

Ideal to ensure the cans clearness and conformity , before the filling process. The system improves final product quality and reduces the number of jams and rejects due to the presence of imperfections

Close

Cap – 360° Inspection (IT700-2VA)

Manufacturer:

Ideal to ensure the quality and the conformity of the capping and prevent rejects caused by the incorrect closure of the filled containers, distribution of products not intact, due for example to breakage of the security ring, or non-compliant, incorrect

Close

CAP QUALITY INSPECTION – On top of the pocket sorter( QT750-VA)

Manufacturer: FT Systeem

recommended for ROPP cap (Ex:. Stelvin) in order to reduce both the number of jams along the line and rejects produced during the capping phase due to defective caps.

Close

CAP QUALITY INSPECTION – On Vacuum Conveyor Belt(QT720-VA)

Manufacturer: FT Systeem

recommended for all the caps that have a flat upper surface in order to reduce both the number of jams along the line and rejects produced during the capping phase due to defective caps.

Close

Code Control – Presence, Integrity (IC600-SE / IC700-1VA)

Manufacturer: FT Systeem

Ideal to ensure the presence of the alphanumeric codes (lot, expiration date, etc.), printed on the body of the container, on the cap or on the label by means of sensors or cameras.

Close

Code Inspection – Presence, Integrity, Correspondence, Reading (IC700-1VA / 2VA – OCR/OCV)

Manufacturer: FT Systeem

Ideal to verify and control the readability of the codes (lot, expiration date, barcode, datamatrix) printed on the body of the container, on the cap or on the label by means of industrial cameras.

Close

Complete Labelling Inspection – NOT ORIENTED container – 3D Technology( IE4000-3D 5Mpx)

Manufacturer: FT Systeem

Ideal to ensure the total quality of the labelling as regards the correct positioning, compliance with the format being produced and integrity of the labels of each type,

Close

Ejection / Diverting device( Z-Serie)

Manufacturer: FT Systeem

Ideal to ensure the rejection or the deviation towards specific channels of non-compliant products, destined to analysis laboratory or particular working cycles.

Close

EMPTY BOTTLES INSPECTION – Base Inspection( IV700)

Manufacturer: FT Systeem

Ideal to ensure the quality of empty containers, before the filling process. The system performs the base inspection of the empty bottle to ensure their compliance and quality

Close

EMPTY BOTTLES INSPECTION – Full Inspection (IV1000)

Manufacturer: FT Systeem

Ideal to ensure the quality of empty containers, before the filling process. The system performs the full inspection of the empty bottle to ensure their compliance and quality

Close

EMPTY CANS Inspection – FULL inspection( IO700-VA)

Manufacturer: FT Systeem

Ideal to ensure the quality of empty cans, before the filling process. The system improves final product quality and reduces the number of jams and rejects due to the presence of imperfections

Close

FLANGE Inspection – EMPTY CANS IO700-VA

Manufacturer: FT Systeem

Ideal to ensure the cans flange integrity , before the filling process. The system improves final product quality and reduces the number of jams and rejects due to the presence of imperfections

Close

LABEL PRESENCE CONTROL – IN LINE (CE600-SE / VA / C)

Manufacturer: FT Systeem

Ideal to ensure the presence of WRAPAROUND or SLEEVE labels, opaque or partially transparent

Close

LABEL PRESENCE CONTROL – INSIDE THE MACHINE (CE630-SE / VA / CR)

Manufacturer: FT Systeem

Ideal to ensure the presence of PARTIAL LABEL, opaque or partially transparent

Close

Leak Control (squeezer)(TB1000)

Manufacturer: FT Systeem

Ideal to ensure the compliance with the quality standards by checking the tightness of the containers filled and closed through the correlation between a non-destructive compression module and pressure measure, combined with the

Close

Leak/Pressure control for flexibles and not deformables containers (Cans) (TB5000)

Manufacturer: FT Systeem

Ideal to ensure the compliance with the quality standards by checking the tightness of the containers filled and closed through the correlation between a non-destructive pressure measure module, combined with the level control.

Close

Line Monitoring and Sampling system

Manufacturer: FT Systeem

Ideal for the supervision of the production cycle. It allows to intervene on the production in a targeted manner by reducing the malfunction and the maintenance and increasing line efficiency.

Close

PARTIAL LABELS POSITIONING INSPECTION – In Machine System (IE730_1VA- IE730_2VA)

Manufacturer: FT Systeem

Ideal to ensure the correct positioning of PARTILA labels, opaque or partially transparent

Close

PARTIAL LABELS QUALITY INSPECTION( IE720_1VA- IE720_2VA)

Manufacturer: FT Systeem

Ideal to ensure the presence, correct positioning, correspondence, Integrity, code check of PARTIAL labels

Close

PREFORM QUALITY INSPECTION – Bottom and Internal Walls (QP001-VA)

Manufacturer: FT Systeem

Ideal to detect the defects of bottom/Internal walls and reduce both the number of jams along the line and rejects due to defective preforms and ensure the quality of the final product.

Close