Cap – 360° Inspection (IT700-2VA)
Manufacturer:
Ideal to ensure the quality and the conformity of the capping and prevent rejects caused by the incorrect closure of the filled containers, distribution of products not intact, due for example to breakage of the security ring, or non-compliant, incorrect
CAP QUALITY INSPECTION – On top of the pocket sorter( QT750-VA)
Manufacturer: FT Systeem
recommended for ROPP cap (Ex:. Stelvin) in order to reduce both the number of jams along the line and rejects produced during the capping phase due to defective caps.
CAP QUALITY INSPECTION – On Vacuum Conveyor Belt(QT720-VA)
Manufacturer: FT Systeem
recommended for all the caps that have a flat upper surface in order to reduce both the number of jams along the line and rejects produced during the capping phase due to defective caps.
Code Control – Presence, Integrity (IC600-SE / IC700-1VA)
Manufacturer: FT Systeem
Ideal to ensure the presence of the alphanumeric codes (lot, expiration date, etc.), printed on the body of the container, on the cap or on the label by means of sensors or cameras.
Code Inspection – Presence, Integrity, Correspondence, Reading (IC700-1VA / 2VA – OCR/OCV)
Manufacturer: FT Systeem
Ideal to verify and control the readability of the codes (lot, expiration date, barcode, datamatrix) printed on the body of the container, on the cap or on the label by means of industrial cameras.
Complete Labelling Inspection – NOT ORIENTED container – 3D Technology( IE4000-3D 5Mpx)
Manufacturer: FT Systeem
Ideal to ensure the total quality of the labelling as regards the correct positioning, compliance with the format being produced and integrity of the labels of each type,
Ejection / Diverting device( Z-Serie)
Manufacturer: FT Systeem
Ideal to ensure the rejection or the deviation towards specific channels of non-compliant products, destined to analysis laboratory or particular working cycles.
LABEL PRESENCE CONTROL – IN LINE (CE600-SE / VA / C)
Manufacturer: FT Systeem
Ideal to ensure the presence of WRAPAROUND or SLEEVE labels, opaque or partially transparent
LABEL PRESENCE CONTROL – INSIDE THE MACHINE (CE630-SE / VA / CR)
Manufacturer: FT Systeem
Ideal to ensure the presence of PARTIAL LABEL, opaque or partially transparent
Leak Control (squeezer)(TB1000)
Manufacturer: FT Systeem
Ideal to ensure the compliance with the quality standards by checking the tightness of the containers filled and closed through the correlation between a non-destructive compression module and pressure measure, combined with the
Leak/Pressure control for flexibles and not deformables containers (Cans) (TB5000)
Manufacturer: FT Systeem
Ideal to ensure the compliance with the quality standards by checking the tightness of the containers filled and closed through the correlation between a non-destructive pressure measure module, combined with the level control.
Line Monitoring and Sampling system
Manufacturer: FT Systeem
Ideal for the supervision of the production cycle. It allows to intervene on the production in a targeted manner by reducing the malfunction and the maintenance and increasing line efficiency.
PARTIAL LABELS POSITIONING INSPECTION – In Machine System (IE730_1VA- IE730_2VA)
Manufacturer: FT Systeem
Ideal to ensure the correct positioning of PARTILA labels, opaque or partially transparent
PARTIAL LABELS QUALITY INSPECTION( IE720_1VA- IE720_2VA)
Manufacturer: FT Systeem
Ideal to ensure the presence, correct positioning, correspondence, Integrity, code check of PARTIAL labels
Pressure inspection WITHOUT CONTACT – CARBONATED product (PCS700_CO2)
Manufacturer: FT Systeem
Pressure measurement system via “laser spectroscopy”. Suitable for the inspection, without contact, of the pressure in all types of containers without being influenced by physiological changes of the closure or container itself.
Pressure inspection WITHOUT CONTACT – CARBONATED product P(CS700_CO2)
Manufacturer: FT Systeem
Pressure measurement system via “laser spectroscopy”. Suitable for the inspection, without contact, of the pressure in all types of containers without being influenced by physiological changes of the closure or container itself.
QCS120 – Automatic Quality Control System (QCS120)
Manufacturer: FT Systeem
Ideal for dynamic and continuous optimization of the line productivity, ensuring the product highest quality through a continuous and non-invasive sampling that allows the re- introduction in line of all containers analyzed.
QCS120 – Automatic Quality Control System( QCS120)
Manufacturer: FT Systeem
Ideal for dynamic and continuous optimization of the line productivity, ensuring the product highest quality through a continuous and non-invasive sampling that allows the re- introduction in line of all containers analyzed.
Vacuum/Pressure control – Acoustic Sound Technology (Sonar) (VP600-AS)
Manufacturer: FT Systeem
Ideal to ensure product compliance with the quality standards checking vacuum presence or correct internal pressure in glass containers closed with crown cap.
Vacuum/Pressure control – Cans – PX Technology (proximity inductive measure)(VP600-PX)
Manufacturer: FT Systeem
Ideal to ensure product compliance with the quality standards checking vacuum presence or correct cans internal pressure
Vacuum/Pressure control – Twist-Off Cap – PX Technology (proximity inductive measure) (VP600-PX)
Manufacturer: FT Systeem
Ideal to ensure product compliance with the quality standards checking vacuum presence or correct internal pressure in containers closed with Twist-Off cap
Weight control – Full Cases, Kegs, Bag in Box, etc… (CP600-TP / CP700-TP)
Manufacturer: FT Systeem
Ideal to ensure the presence of all the elements and containers inside the final package. It verifies that the final and packed product has the correct weight, avoiding the shipping of packages containing foreign objects through dynamic measurement by ..
WRAPAROUND LABEL POSITIONING INSPECTION(IE720_1VA- IE730_1VA)
Manufacturer: FT Systeem
Ideal to ensure the correct positioning of WRAPAROUND labels, opaque or partially transparent
